Ceramic tile kitchen floor – There are a plethora of different tiles that vary in the manufacturing process, size, color, function and more. Here are most common ceramic tile, its characteristics, requirements for surface mounting. Facing title is dry-pressed tiles with high water absorption, usually 10-20%, intended primarily for installation on the wall indoors. Tiles made of clays results in a more porous material than clinker, which for practical use requires glazing. The forming of the tile is the same as molded tiles.
Mosaics are small tiles, often in combinations of different sizes and shapes. Is common is that the supplier is normally mounted on the sheets or meshes to facilitate assembly. Mosaics is recommended for floors, include as ceramic tile kitchen floor and walls indoors and is suitable for curved surfaces and complex patterns and figures. For swimming pools, see below. For the installation of tiles, the surface must be sufficiently supporting. When ceramic tiles are heavier than most other flooring materials, it is important to ensure that the team’s design is suitable to install tiles on. In some cases, surface enhanced. Most ceramic plates fitted with a fixed/adhesive which is spread with a notched trowel on the surface since the ceramics is spent on. Trowel leaves a certain fixed amount, calculated in liters per m². Thereafter jointing composition in the joints.
Available in different colors, shades, and design. Suitable for use in combination with underfloor heating as ceramics have the ability to store heat. Suitable for virtually all indoor spaces. Requires little maintenance work more than everyday cleaning. Mosaic in swimming pools must be fitted with a paper front to get as large contact surface as possible. Care ceramic tile kitchen floor and wall tiles are virtually maintenance free. However, it requires a regular weekly cleaning and wiping the spills and other contamination. Do not allow water to stagnate in pools because hard water can cause stains. When installing under floor heating will heat the earliest switched on for 28 days and will then be increased by 5 ° C per day to the desired temperature. On a glazed surface, dirt is difficult to draw, unlike an unglazed surface.