Bunk beds twin over twin – While a bunk bed with a double-size bunk bed over a full-size bunk bed is not as common as popular models with two double beds, they are equally easy to mount. Different brands and models have different features, but most of the metal frames follow the same format. When assembling your bunk bed frame, according to specifications provided by the manufacturer, even if they conflict with the instructions here or elsewhere.
How to mounting a metal bunk beds twin over twin. Clear the floor in the area where you want to install the bunk bed frame. Clean the floor in the area where you want to install the bunk bed frame. Set one end piece against the wall, approximately where the bed will be when completed. Place a gable against the wall, where the bed will be when it is ready. Make sure the play is in the right direction, with the wider bottom part towards the direction you want it to go. Place the end piece in position opposite the first. Place the end piece in position opposite the first one. This and the following steps will be much easier if you have an assistant.
Then to mounting a metal bunk beds twin over twin. Set the back bottom bunk rail in position, connecting the two end pieces at the bottom. Put the bottom bunk bed into position, which connects the two end pieces at the bottom. In some models, all four beds will be identical. In other cases, you must use a special rack. Attach the back bottom bed rail to the end pieces, which vary from model to model. Attach the bottom bed gate to the gates, which vary from model to model. Set the front bottom bed rail in position. Set the front bottom bed gate in place. Attach as you did the first shine. Position and attach the rear top and front top bed rails in similar fashion to the others. Place and attach the rear upper and front upper bed rails in a similar manner to the other. Tighten down the attachments for all four rails until the frame is sturdy. Lay the mattresses in place on the ridges of the bunk rails.