Solid surface kitchen counter – Countertops can instantly change the look elegant and feel of your kitchen. With that said, people often spend a lot of money trying to make their bench looks the best it can be. They also spend a lot of money to get their countertops installed. The latest trend is solid surface countertops. These worktops are integral and may be a variety of materials. Normally these require a professional to install, but doing it yourself can save a lot of money.
Ideas for install solid surface kitchen counter, remove the old worktop by unscrewing it from inside the cabinets. Inspect the cabinet at this point and to ensure that there is no damage and make sure they are level. If they are not level, add shims where it is necessary to smooth the entire bench area. Remove the sink. Turn off the water and disconnect the piping system before removing the sink. Install additional support to the back wall and the top of the cabinets. This is normally only necessary if your cabinet is really old or there is a large empty span, such as a dishwasher slot. To do this, simply screw them to the wall with screws every foot or so.
Add the countertop down to the surface and make sure it fits properly. Once you know it, lift up the front edge and apply a bead of silicone along the cabinet and support. Add the countertop down tight. Do not wipe off the excess. You will send out here when it’s dry. This will assist in bonding. Fasten the worktop in various fields. Use tinted epoxy at the joints into two pieces of granite. Press the countertop pieces together and then hot glue pinch points on each piece of countertop, just at the corners of the two parts. Once dry, apply clips to the two clamping points. Allow the epoxy to dry and then apply rubbing alcohol to weaken the hot glue and remove the pinch points. Tips and warnings, work with a partner to make the job a little easier. The solid surface kitchen counter can be very heavy and difficult to lift and move around. Buff countertop if you want an extra sheen.